Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 25 Next »


Filtering can be managed using a combination of four parameters:

  • Entering a Trip Number

    • Enter the exact Trip Number in the Trip Number field

  • Filter by Exact Date

    • Enter the exact Date in the filter by date field

  • Filter by Date Range

    • Enter the starting Date in the filter by date field

    • Select the number of days you wish to be added from the drop down box

  • Filter by Depot

    • The Depot can be selected from the Depot Drop Down

  • Create Trip Button

    • Press the Yellow Button, Create Trip

    • This will then open a Modal Window

  • Modal Window

    • Select the relevant Depot.

    • Select the Trip Date

    • If you use Trip Statuses, select the required status.

    • If you use Zone Sets, select the zone set for this trip.

  • Trip Card

    • Once you click Create, you will be presented with a Card

    • This card has a summary of details for the new Trip


Un-Tripped Button

  • Press the Blue Button, Un-Tripped

    • This will open a Modal Window

  • Modal Window

    • This will show all addresses that are waiting to be added to a Trip

    • Commonly used columns include

      • Postcode

      • Customer

      • Address Type

      • Weights and Measures

      • ZoneSets (if used)

Show on Map Buttons

  • You can also click Show Selected on Map (after selecting addresses) or Show all on Map

    • This will then open a Modal Window

  • Modal Window

    • This will show PINs for each of the selected addresses that are waiting to be added to a Trip


You can add jobs to trips in multiple ways:

  1. Un-Tripped to New or Existing Trip

image-20240530-152512.png

Tick the required check boxes on the left hand side of each row.

You now have two options:

  • image-20240530-153150.png Add to New Trip (follow the instructions above).

  • image-20240530-153130.png Add to Existing Trip, (you will need the trip number prior to clicking the button).
    This will open a small modal window, enter the trip number and click Update Trip.

image-20240530-152858.png
  1. Dragging from Un-Tripped Modal to Trip Card

image-20240530-153608.png

Select Click on the Candybox image-20240530-154417.png hold, and drag onto the card.

image-20240530-154605.png

Click yes to confirm the move.

** You can also move the enitre modal window by clicking on the header (highlighted).

image-20240530-155022.png

  1. Dragging from Existing Trip Modal to Trip Card

You can click the pencil of an existing trip to open a Small Trip Modal which can also be moved and allow you to follow the same steps as above to move from Trip Modal to Trip Card

image-20240530-155507.png

Which will open this Small Trip Modal.

image-20240530-155603.png
  1. From Map to Trip

Right Click on the map to drop green arrows, once you have done this you can click Set Group or Clear Group to startimage-20240530-160511.png again.

image-20240530-160337.png

This will then place a these drops in a group which can then be added to a trip by clicking Add to Trip.

image-20240530-160518.png

You will now be presented with another Modal Window that you can choose the trip you wish to add the drops onto, alternativly you can Create a trip

image-20240530-160757.png

Once you click Add the Selected drops will go onto that New or Existing Trip.


You can open a trip by either entering the Trip Number, double clicking on a Trip Card or clicking a Blue Link from other locations in Journease Go.

By doing so this will open a Trip Modal

  • No labels