In order to create Trips the job addresses that need to be tripped will need to be set as Trippable, this can be done on the individual Job Address by ticking the Trippable tickbox, or set to true by default (Default settings > Screen Defaults > Trip' C (collection addresses) and/or Trip' D (delivery Addresses))

You will also require your system to be set up to work with Statuses, both Trip Statuses and Job Statuses (If you need assistance in setting these up please call Support on 0117 958 6180)

There are four methods for placing Jobs onto trips:- 

2) Manual 

3) Semi Automatic

4) Fully Automatic 

In this example we are going to create a Trip using the manual method for multiple customers addresses. In the above picture we have created three Jobs for this example (17419, 17420 and 17421)

These appear in the Available Job Addresses (Left hand pane) list ready for allocation.(fig1)

1. Click on New to create a new Trip
2. Change the Vehicle Type to the one that is going to be used for this Trip
3. Enter the Trip Date
4. Change the Trip Status to In Planning (Statuses should have been set prior to creating a trip, for information on how this is done look HERE)
5. Click Save - this will create a Trip Number in the top left of the Trip Details section
6. If you have multiple Depots set up in Journease then select the Depot that this Trip is being created for, the Start Address and Destination will be set automatically to this Depot address, however if this differs you can change it in the appropriate

1. text input fields
2. Select a Supplier / Driver that is carrying out this Trip.
3. You now need to click Save to create/update the Trip before you can allocate Job Addresses to it.
4. Select the first Address that you wish to add from the Available Job Addresses list and click on the Add button (green plus), the Job details will move over to the Job Addresses on Trip window and the Loaded Summery will update with loaded information.
5. If there is still room available on the vehicle you can add another Address, and another, and another until the Vehicle is full.

In this example we are going to create a Trip using the manual method for multiple customers addresses. In the above picture we have created three Jobs for this example (17419, 17420 and 17421)

These appear in the Available Job Addresses list ready for allocation.(fig1)

1. Click on New to create a new Trip
2. Change the Vehicle Type to the one that is going to be used for this Trip
3. Enter the Trip Date
4. Change the Trip Status to In Planning (Statuses should have been set prior to creating a trip, for information on how this is done look HERE)
5. Click Save - this will create a Trip Number in the top left of the Trip Details section
6. If you have multiple Depots set up in Journease then select the Depot that this Trip is being created for, the Start Address and Destination will be set automatically to this Depot address, however if this differs you can change it in the appropriate textboxes
7. Select a Supplier / Driver that is carrying out this Trip.
8. You now need to click Save to create/update the Trip before you can allocate Job Addresses to it.
9. Below the list of available jobs click on the Plot Addresses button
10. Once addresses have been plotted the adjacent View Map button will become available, click on this to view the available addresses as pins on the map
11. Double click on the map to gain focus then select the "Laser" button (second from right at top of map)
12. Using the right mouse button draw a box around the area that this trip is going to then click the "Laser" button again, this will create a coloured box around that area
13. Click on Trip Screen to return, then click Grab Addr's, the Job Addresses that fall within the coloured box will move over to the Job Addresses on Trip window and the Loaded Summery will update with loaded information.
14. If there is still room available on the vehicle you can add another Address, and another, and another until the Vehicle is full.
15. NOTE:- This method will not take into account available room and manual adjustment will be required after to decide which job addresses to keep on the Trip should the vehicle be overloaded.

For this we will first need to set up some Trip Zone Sets, you will also require volume/weight measurements for the vehicles that you intend to use and volume/weight details for the items that you are transporting on each Job Address

1. Once the customisations are in place to allow this and you have your Trip Zone Sets set up correctly simply go to the Trip Screen
2. Before you select or create a new Trip click on the Auto Allocate button (this will only be available if no trip is displayed), This will check all available addresses and compare them to the Trip Zone Sets
3. If it finds a Trip that is already created that is going to the required postcode area and has room available it will add the Job Address to that trip
4. If there are no current trips available going to the required postcode area it will look for a Trip Zone Set going to that particular postcode area and will automatically create the Trip and add the address (and other addresses for that area).
5. Once the addresses have been allocated to a Trip  the allocated Job Addresses will disappear from the left hand pane
6. To view the Trip or Trips that have been modified / created click on the 'magnifying glass' next to Trip No. and select from the Browser list (this can be filtered by Address if you are looking for a particular address or creation date to find new Trips that have been created today, etc).

Auto-Allocate progression

When you click on auto-allocate on the Trip Screen Journease will allocate a Job to a Trip in the following order (N.B. this is done in the background so you will not actually see the lists in real time):-

1. List all Trips going to the required postcode area
2. Remove Trips that have insufficient room for this Job Address
3. Order the list of remaining Trips into priority order for the required postcode area
4. Allocate the Job to the first Trip in the list

Remember at this stage the Trip is still In Planning, 

For this we will first need to set up some Trip Zone Sets, you will also require volume/weight measurements for the vehicles that you intend to use and volume/weight details for the items that you are transporting on each Job Address

1. Once the customisations are in place to allow this and you have your Trip Zone Sets set up correctly we need to tick the box marked Auto Allocate Jobs to Trips in the Customer Details screen for each customer that we wish to apply this ability
2. It would also be advisable to have the Trippable tickbox set to true by default (Default settings > Screen Defaults > Trip' C (collection addresses) and/or Trip' D (delivery Addresses)) to save having to change each address individually.
3. Now that we have the criteria set up, whenever you save a Job for the customer in question it will automatically be added to the next available Trip
4. If there are no current trips available going to the required postcode area it will look for a Trip Zone Set going to that particular postcode area and will automatically create the Trip and add the address (and other addresses for that area).
5. Once the addresses have been allocated to a Trip  the allocated Job Addresses will disappear from the left hand pane
6. To view the Trip or Trips that have been modified / created click on the 'magnifying glass' next to Trip No. and select from the Browser list (this can be filtered by Address if you are looking for a particular address or creation date to find new Trips that have been created today, etc).

Auto-Allocate progression

When the Jobs are saved Journease will allocate a Job to a Trip in the following order (N.B. this is done in the background so you will not actually see the lists in real time):-

1. List all Trips going to the required postcode area
2. Remove Trips that have insufficient room for this Job Address
3. Order the list of remaining Trips into priority order for the required postcode area
4. Allocate the Job to the first Trip in the list

Remember at this stage the Trip is still In Planning, 

Note:- If you require this to work for jobs that are imported via csv (in Journease) or Import Facility (in Delivery Booker) then there is one further customisation that will need to be put in place by Journease Staff to ensure that imported jobs are automatically set to Trippable.

Now that we have a Trip that is In_Planning we need to organise the Trip, contact the End Users (the people you are delivering to) and get it to the point where we can Finalise the Trip and get it out on the road.

1. If not done so already, select the Vehicle and driver for the trip
2. All Jobs with Job Addresses on this Trip should have a Job Status of Booked, this can be checked by selecting a Job Address on the trip and pressing F2 which will bring up the Job Details for this Job Address
3. Next tick the box for Optimise Stops then click on Calc Route - this will put the addresses into the most optimal order for Delivery/Collection and update the times for each Job Address
4. Next we can add Breaks for the drivers (if required) by selecting the Job Address that will be After the break, selecting